MyEyes

Free second class shipping on all UK orders over 10 but upgrade to First Class or Special Delivery for a small charge.

Shop with confidence - UK registered Optometrists and Opticians

 

Start of Content

SeeDive

MyEyes | Diving Masks | Accessories and Parts |  SeeDive

SeeDive


SeeDive

SeeDive

SeeDive
Zoom Images


Price : 32.20


Power
   


All our prices include VAT + FREE UK shipping when you spend over 10






SeeDive Push On Lenses

Easy to install, just wet and push into place.

9 Powers

Clear

SeeDive Push-On Lenses.

Bifocal Magnification lenses for your dive mask!

SeeDive Push-On Lenses optix magnifiers are the best solution for the scuba diver who needs help seeing their Gauges, Consoles, Compasses, Camera and Computers during their dive. They work like a pair of reading glasses inside your mask. Use the same power in your mask as your regular reading glasses. The SeeDive Push-On Lenses push into place using only water, and can be removed or re-positioned without glue or leaving any residue behind. SeeDive Push-On Lenses are not just for SCUBA and Snorkel masks. They will work on eyeglasses, sunglasses and camera housings also!

Available as a pair in 9 different Powers: +1.00, +1.50, +2.00, +2.50, +3.00, +3.50, +4.00, +5.00 & +6.00

Easy to install, just wet and push into place.

See what you’ve been missing, order a pair for you, and a pair for your dive buddy today!

Installation Instructions:

1. Wash both the Mask/Sunglass/Eyeglass and the Push-On lens with a weak solution of lotion free liquid dish detergent to remove grease and soil. Rinse thoroughly.

2. For best results, place the Mask/Sunglass/Eyeglass under a stream of running warm water or submerged in a bowl of warm water, wipe away any air bubbles clinging to either surface of the lens.

3. Position the Push-On lens with the SMOOTH side toward the inside surface of the Mask/Sunglass/Eyeglass. Remove the Mask/Sunglass/Eyeglass from the water, holding the Push-On lens in place. Adjustments can be made by sliding the Push-On lens.

4. Press with your thumb to remove any air bubbles.

5. Pat dry.

6. Handle gently for 24 hours after applying.

Faint grey patches that may develop are temporary and usually disappear as drying is complete.

Alcohol is NOT recommended for repeated application of the lenses.

Cleaning Instructions: Important:

Do not remove the Push-On Lenses from the Mask, Sunglass or Eyeglass lens for cleaning.

1. Rinse Mask/Sunglass/Eyeglass lenses under a gentle stream of warm running water. If contaminants remain after rinsing, use a soft brush to clean the grooves.

2. Pat or blot dry with a soft, lint-free cloth.

3. Follow any special cleaning procedures as instructed by your eye care specialist.

For proper care of your SeeDive Push-On Lenses, use the above procedure often.

1-3 days

Manufactured by SeeDive

MyEyes | Diving Masks | Accessories and Parts |  SeeDive


spacer
End of Content

Copyright © MyEyes Limited 2001-2016